Confirmed with JBA...yes, they DO fit the 2001 models. They are available,
$470 for ceramic coated ($360 for standard) and the turn around time is
approximately 3-5 days on standard version and 7-10 days for the ceramic coated.
- Bernd
>
> Those were the Borla headers. JBA doesn't like to release headers
> unless there's at least 10HP to be made. I'm requesting the dyno sheet
> as well.
>
> There's a similar situation with the F150 SVT's...the "other brand"
> headers made almost no difference...JBA has proof (and another truck
> magazine backed it up) with close to 30RWHP more. I believe Matt is
> going to be testing them as well very soon.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@BUFFNET.NET
> [mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Josh Stolarz
> Sent: Thursday, June 21, 2001 6:10 AM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: Re: DML: Jet Chips/JBA Headers
>
>
> Just have to be careful with stating numbers for the 4.7. Someone
> already put on 4.7 headers (signman?) and found they did absolutely
> nothing. If JBA does state the numbers, just make sure they can produce
> a dyno sheet to back it....
>
> Josh
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:50 EDT