All right, what's the big difference between coated and standard?
Jay W
bernd@texas.net wrote:
> Confirmed with JBA...yes, they DO fit the 2001 models. They are available,
> $470 for ceramic coated ($360 for standard) and the turn around time is
> approximately 3-5 days on standard version and 7-10 days for the ceramic coated.
>
> - Bernd
>
> >
> > Those were the Borla headers. JBA doesn't like to release headers
> > unless there's at least 10HP to be made. I'm requesting the dyno sheet
> > as well.
> >
> > There's a similar situation with the F150 SVT's...the "other brand"
> > headers made almost no difference...JBA has proof (and another truck
> > magazine backed it up) with close to 30RWHP more. I believe Matt is
> > going to be testing them as well very soon.
> >
> > - Bernd
> >
> > -----Original Message-----
> > From: owner-dakota-truck@BUFFNET.NET
> > [mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Josh Stolarz
> > Sent: Thursday, June 21, 2001 6:10 AM
> > To: dakota-truck-moderator@bent.twistedbits.net
> > Subject: Re: DML: Jet Chips/JBA Headers
> >
> >
> > Just have to be careful with stating numbers for the 4.7. Someone
> > already put on 4.7 headers (signman?) and found they did absolutely
> > nothing. If JBA does state the numbers, just make sure they can produce
> > a dyno sheet to back it....
> >
> > Josh
> >
> >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:50 EDT