Make sure you stuff a rag into the hole the stat came out of before you
go scraping. You don't want old gasket material getting into your
cooling system.
Chuck Robbins wrote:
>
> Reach in there with your finger and grab hold. If you can't get it that way,
> use a small screwdriver and wedge it in the top of the T-stat. Don't use
> anything to try and get under the T-stat because you might scratch the
> gasket flange. Once the T-stat is off, then use a screwdriver or putty knife
> and very carefully remove any of the old gasket.
>
> --
> Chuck Robbins
> '99 Dakota Sport
> www.intense99dak.com
>
> > Ok, i got the hose off and im staring at the tstat. It looks like its in
> > thier and won't come off, did you guys have to pry your's off the engine?
> > Any easy way of gettin this off? thanks
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at http://explorer.msn.com
> >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:51 EDT