The are some points on the block that have to be ground down for clearance.
Mopar Action December 2000 issue has a fairly detailed article on preparing
the block for the crank. Mopar also sells the .020 pistons needed and with
them you can use the stock rods.
Sam South
95 Dak, 5.2L,3.90 LSD,5-speed(Soon to be 360 powered)
14.10@98.05
http://www.twistedbits.net/WWWProfile/dakota/Mt5J8FaDfVCv6/
http://people.mw.mediaone.net/sawcut64/home.html
----- Original Message -----
From: <jon@dakota-truck.net>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Tuesday, June 26, 2001 3:11 PM
Subject: Re: DML: Re: 360 Magnum Stroker crank wanted
> "Sam South" <sawcut64@mediaone.net> wrote:
> : Monicatti Chrysler in Sterling Heights MI sells them for about $245.00
for
> : the crank. Their phone# is (810)977-1700
> : Sam South
>
>
> Is this something that can be bolted right in, or does it require
> different rods/pistons or any machining work?
>
>
> --
>
> -Jon-
>
> .---- Jon Steiger ------- jon@dakota-truck.net or
jon@jonsteiger.com -----.
> | Affiliations: AOPA, DoD, EAA, NMA, NRA, SPA, USUA; Rec & UL Pilot -
SEL |
> | '92 Ram 150 4x4 V8, '96 Dakota V8, '96 Intruder 1400, '96 FireFly 447
|
> `------------------------------------------
http://www.jonsteiger.com ----'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:52 EDT