The diamond racing pistons they sell are pretty good pistons - but I wouldn't
use the stock rods - they are just to heavy imho :). I got a set of eagle i-beams
for around 250 which are ~150 grams lighter than stock (forged 4340, blah blah)
Chris Bennight
----- Original Message -----
From: "Sam South" <sawcut64@mediaone.net>
To: <dakota-truck@BUFFNET.NET>
Sent: Tuesday, June 26, 2001 2:57 PM
Subject: Re: DML: Re: 360 Magnum Stroker crank wanted
| The are some points on the block that have to be ground down for clearance.
| Mopar Action December 2000 issue has a fairly detailed article on preparing
| the block for the crank. Mopar also sells the .020 pistons needed and with
| them you can use the stock rods.
| Sam South
| 95 Dak, 5.2L,3.90 LSD,5-speed(Soon to be 360 powered)
| 14.10@98.05
| http://www.twistedbits.net/WWWProfile/dakota/Mt5J8FaDfVCv6/
| http://people.mw.mediaone.net/sawcut64/home.html
|
| ----- Original Message -----
| From: <jon@dakota-truck.net>
| To: <dakota-truck-moderator@bent.twistedbits.net>
| Sent: Tuesday, June 26, 2001 3:11 PM
| Subject: Re: DML: Re: 360 Magnum Stroker crank wanted
|
|
| > "Sam South" <sawcut64@mediaone.net> wrote:
| > : Monicatti Chrysler in Sterling Heights MI sells them for about $245.00
| for
| > : the crank. Their phone# is (810)977-1700
| > : Sam South
| >
| >
| > Is this something that can be bolted right in, or does it require
| > different rods/pistons or any machining work?
| >
| >
| > --
| >
| > -Jon-
| >
| > .---- Jon Steiger ------- jon@dakota-truck.net or
| jon@jonsteiger.com -----.
| > | Affiliations: AOPA, DoD, EAA, NMA, NRA, SPA, USUA; Rec & UL Pilot -
| SEL |
| > | '92 Ram 150 4x4 V8, '96 Dakota V8, '96 Intruder 1400, '96 FireFly 447
| |
| > `------------------------------------------
| http://www.jonsteiger.com ----'
|
|
|
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:01:53 EDT