Thanks for clearing that up. Keep up the good work!
----- Original Message -----
From: "Bernd D. Ratsch" <bernd@texas.net>
To: <dakota-truck@buffnet.net>
Sent: Sunday, July 01, 2001 10:22 PM
Subject: RE: DML: MSD
>
> I don't doubt that Marks data is accurate...for his truck, and other who
> have run their tests as well. But look at the overall picture. Most
> who have installed them have all stated that they run smoother, idle
> better, and seem to run stronger. I don't have my old dyno sheets
> anymore but yes, I did test the MSD on my V6 as well and found that it
> helped (not degraded) performance.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net] On Behalf Of Kevin
> Subject: Re: DML: MSD
>
> Bernd, don't want to start a flame war, but since you are the most
> experienced Dakota guy, I think you would defer to Mark's data on the
> MSD. Unless you have numbers to back up your claims. It would be nice if
> we could get hard data from either MSD or any of the other folks out
> there using any aftermarket ignition. If I had access to a dyno I would
> do it, as I have questions myself. I have been running a 6A for the past
> 3 years, and recently removed it to see if I can tell a difference with
> all of the mods I have done lately.
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:03 EDT