This was probably done as a cost saving measure. They just tied the bed
lights to the overhead interior lights since they are both very close to
each other. No modifications was done to the switch. The bed light can
easily be rewired to a separate switch if desired.
-----Original Message-----
From: MALDBNSF@aol.com [mailto:MALDBNSF@aol.com]
Sent: Wednesday, July 04, 2001 10:31 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: Re: A thought on tailgate open switches (ATTN: Don M)
In a message dated 7/3/01 6:26:42 PM, a0004096@airmail.net writes:
>I was meaning the way Dodge set up the factory switch. You have to turn
>on the interior lights just to get the bed light on. Just one of the
things
>that I probably would have done differently.
>> What switch is annoying to you?
I see now says the blind man;}
Don M
http://www.geocities.com/maldbnsf
'00 QC Bronze, 4.7L, Rest listed at
http://www.twistedbits.net/WWWProfile/dakota/QwkvWz@DAJFf6/profile.htm
P.S. Did I mention I love my DAK!!!!!!!!!
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:03 EDT