Before you put those ProComp's on, David, you'd better listen to Jason.
Maybe Tokico's aren't so bad after all.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of jbleazard@home.com
Sent: Sunday, July 08, 2001 3:23 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: Shocks...a better type??
David,
How does FREE sound? I see some people have recommended the ProComp
9000s. I've got a set of four 3000s that I'll send to you for just the cost
of
shipping. You'd want to replace the bushings. They were on the truck from
December to July, I just decided that they're too stiff for my tastes.
(For the record, ProComp's web site implied that the 9000 series is more
stiff
than the 3000s, so I don't need anyone suggesting that I try the 9000s
instead.
Thanks anyway.)
If you're interested, let me know and I'll verify that they are the same
part
number for your application.
------------------------------------------------
Jason Bleazard http://www.bleazard.net Toronto, Ontario
his: '95 Dakota Sport 4x4, 3.9 V6, 5spd, Reg. Cab, white
hers: '01 Dakota Sport 4x4, 4.7 V8, Auto, Quad Cab, black
In article <F108YeR9sy6mmgZzWD600015ebf@hotmail.com>,
dodgedakotaquadcab@hotmail.com ("David D.") wrote:
> I have the Tire/Handling package on my 00' DDQC.
> Thinking of replacing the shocks with something better.
> I dont do any rough stuff,just on the road.
>
> i'm looking at Edelbrock,Rancho,and Bilstein..
>
>
> your help IS appreciated as always.
>
> P.S.: "I dont want to spend an arm and a leg"
>
>
> David Digney
> 00' Dakota Quad Cab
> 3.9 V6,42RE,3.55
> DML Member
> Dakota USA Member/Wisconsin Chapter President
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:04 EDT