Kevin,
Thanks I will be doing that tomorrow morning now, since my friend
came over and took all the bolts out of the pulley. So once I get them put
back in I will be able to get the nut off. Thanks again.
At 06:20 AM 7/12/2001 +0900, you wrote:
>The nut has reverse threads. You need do go clockwise to get it off. Loosen
>two of the pulley bolts enough to get a large screwdriver between them for
>leverage, and turn the nut clockwise.
>----- Original Message -----
>From: <glogg@en.com>
>To: <dakota-truck@buffnet.net>
>Sent: Thursday, July 12, 2001 01:51
>Subject: DML: stock fan removal
>
>
> > Was just wondering if there were any hints or suggestions to getting the
> > stock fan off. I know it is suppose to turn counter clockwise but I for
>the
> > life of me can not get it off. I have the water pump pulley held and it
> > just does not want to budge. Maybe some WD40 to help loosen it up? I am
> > going to go back out and tug on her some more. Thanks in advance for any
> > suggestions. Just want to get my Black Magic fan into today.
> >
> > -Matt Grose
> > South Euclid, OH
> > 97 RC 4x4 Sport 3.9L V6
> >
> >
-Matt Grose
South Euclid, OH
97 RC 4x4 Sport 3.9L V6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:05 EDT