Let me know how it works out.
----- Original Message -----
From: <glogg@en.com>
To: <dakota-truck@buffnet.net>
Sent: Thursday, July 12, 2001 11:37
Subject: Re: DML: Re: stock fan removal
> Kevin,
>
> Thanks I will be doing that tomorrow morning now, since my friend
> came over and took all the bolts out of the pulley. So once I get them put
> back in I will be able to get the nut off. Thanks again.
>
> At 06:20 AM 7/12/2001 +0900, you wrote:
> >The nut has reverse threads. You need do go clockwise to get it off.
Loosen
> >two of the pulley bolts enough to get a large screwdriver between them
for
> >leverage, and turn the nut clockwise.
> >----- Original Message -----
> >From: <glogg@en.com>
> >To: <dakota-truck@buffnet.net>
> >Sent: Thursday, July 12, 2001 01:51
> >Subject: DML: stock fan removal
> >
> >
> > > Was just wondering if there were any hints or suggestions to getting
the
> > > stock fan off. I know it is suppose to turn counter clockwise but I
for
> >the
> > > life of me can not get it off. I have the water pump pulley held and
it
> > > just does not want to budge. Maybe some WD40 to help loosen it up? I
am
> > > going to go back out and tug on her some more. Thanks in advance for
any
> > > suggestions. Just want to get my Black Magic fan into today.
> > >
> > > -Matt Grose
> > > South Euclid, OH
> > > 97 RC 4x4 Sport 3.9L V6
> > >
> > >
>
> -Matt Grose
> South Euclid, OH
> 97 RC 4x4 Sport 3.9L V6
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:05 EDT