> Okay, hoping someone can help me.
>
>1) Is the timing chain I want for a Dodge Magnum 360 (408)
> - Edelbrock 7803
> and is there anything else I need to do (clearance, new timing cover,
etc.)
Chain for ALL LA and Magnum small blocks is the same. I don't know the
Edelbrock part#.
There should be no changes required.
>2) Anyone have a Part number for
> 1) Fel Pro Magnum (360) head gaskets (or Mr. Gasket)
FelPro - #1008 will work. OK for bore up to 4.180, read as fire ring is
further out. Compresses to .039
> 2) ARP head bolt and main bolt kit
ARP doesn't sell a kit for the heads. Hughes has assembled the necessary
pieces as a kit, about $70.
I'm not sure if ARP has the Main kit. Dave at Hughes can help here as well.
>3) Will a standard chrystler small block "A" engine oil pump work in the
magnum,
> and what is the preferred oil pump. (stock re-worked, melling,
moroso, etc.)
Don't know. Please forward me the info, if you find out. I'm also in the
process of building a 408. Low compression (8.3 or so) with aluminum R/T
heads
topped off with a S/C.
TonyC
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:07 EDT