Austin,
If I remember correctly, I paid around $300 to have my heads cleaned,
pressure tested, valves back-cut, a 3-angle seat cut in the heads, new valve
seals installed (not counting the cost of new seals), and resurfacing the
face.
I didn't really need new seals, but since the heads were already torn down,
spending $50 for new seals was a "no brainer".
I did other work on the heads myself, but this can't be include it in the
above list.
Rich - Ashburn, VA
-----Original Message-----
From: DICEMAN469@aol.com [mailto:DICEMAN469@aol.com]
Sent: Thursday, July 26, 2001 9:51 AM
To: dakota-truck@buffnet.net
Subject: DML: Head Work
For those guys with head work, how much did it run you?? Just curious.
-Austin
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:13 EDT