Wood would offer more resistance to heat flow than metal and might make you
tb a little cooler.
just a thought
mm
At 05:12 PM 7/26/2001 -0400, you wrote:
>The TB was raised before but I guess either way would work as long as
>performance isn't hurt. I heard of making a TB spacer out of wood, has
>anyone tried this before?
>Sam South
>95 Dak, 5.9L,3.90 LSD,5-speed
>http://www.twistedbits.net/WWWProfile/dakota/Mt5J8FaDfVCv6/
>http://people.mw.mediaone.net/sawcut64/home.html
>
>----- Original Message -----
>From: <bernd@texas.net>
>To: <dakota-truck@buffnet.net>
>Sent: Thursday, July 26, 2001 11:47 AM
>Subject: Re: DML: TB Spacer
>
>
> >
> > You're trying to raise the TB or just the filter?
> >
> > - Bernd
> >
> > > Does anyone know where I can get a 2" TB spacer, I bought Mark's old ram
>air
> > > hood that Eric Kurtz made, and the spacer he gave me to lift the air
>cleaner
> > > up into the scoops got lost somewhere during the 360 install. Also four
>of
> > > the rounded TB bolts that are 2" longer then stock. Thanks
> > > Sam South
> > > 95 Dak, 5.9L,3.90 LSD,5-speed
> > > http://www.twistedbits.net/WWWProfile/dakota/Mt5J8FaDfVCv6/
> > > http://people.mw.mediaone.net/sawcut64/home.html
> > >
> > >
> >
> >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:13 EDT