It's not really designed for street usage but can be adapted with a
progressive linkage change. John Davis build these for the Mopar 4BBL
TB. Using the TB right out of the box won't work very well...but does
"function".
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net] On Behalf Of Pukeloser@aol.com
Sent: Saturday, July 28, 2001 5:44 PM
To: dakota-truck@buffnet.net
Subject: DML: MP 4bbl throttle body ?
Has anyone had any experience with running the 4bbl Tb from MP?
I'd like to get some good head work done too, any recommendations on
where
to go and what valves to go with?
I plan on getting the M1 intake soon
These are my current mods
95 cc 318 auto, transgo shift kit, HE stage II TB and intake, HE 1418
cam,
1.6 Roller rockers, MSD digi6+, MSD HVC coil & 8.5 wires, Hp cap +
rotor, MP
PCM, DT headers, Gibson exhaust (3" from headers back, no cat), 180
stat,
autolite 3923's, progear DR timing chain, auburn LSD, 4.10 gears,
superior
axles, K&N X-stream filter system, MP valve covers
Thanks
John S
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:14 EDT