Probably will need to rock the wheel lock to lock to fully evacuate the
system.
Stands or on the ground, your choice.
TonyC
-----Original Message-----
From: Andy Levy <andylevy@yahoo.com>
To: dakota-truck-moderator@bent.twistedbits.net
<dakota-truck-moderator@bent.twistedbits.net>
Date: Monday, July 30, 2001 7:46 PM
Subject: Re: DML: ...power steering f/u
Would you have to put the truck up on stands and run the engine and crank
the wheels back and forth a few times to move the fluid through?
TonyC wrote:
> You could buy a gallon of fresh fluid, disconnect the return line, route
> it to a catch can,
> and replenish the reservoir as in empties. Continue until it comes out
> clean looking.
> Then reconnect the return, and top off.
> TonyC
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:02:15 EDT