Dry is asking for it...especially on our engines and at the "200HP
shot".
But hey, it's your engine...not mine.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net] On Behalf Of RDPerform@aol.com
Sent: Thursday, September 27, 2001 6:49 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: BRAND NEW NITROUS KITS FOR 92-99 3.9,5.2,5.9 DAKS
In a message dated 9/5/01 10:24:43 AM, rtdkota@yahoo.com writes:
<< Is it a wet or dry system??? If dry, good luck with longevity of
your truck. >>
Dry is OK. I've used dry kits on Camaros with Ford injectors for years
now
.... low 11s no problem.
I remember drilling and tapping someone's intake for individual nozzles,
along with making a distribution block for the fellow. I think this is
what
he did. Direct port is the way to go. 200hp on a stock motor is no
problem
(strip only, race gas) just make sure you have the extra fuel in there
to
cool those cast pistons.
ttyl
Patrick
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:01 EDT