It had the correct double sided locating spring and the locating tabs on the
back of the pad?
TonyC
-----Original Message-----
From: Kevin Reimer <kwreimer@msn.com>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Saturday, January 19, 2002 8:47 AM
Subject: DML: Re: Re: RE: 2K Brakes pads - PLEASE HELP
>I used this # on my Dak, Raybestos,, PGD820M / COST ME 35.00 AND NO PROBS
>DIRECT INSTALL. And lots less dust from pads than the dusty stock ones..
>----- Original Message -----
>From: TonyC <acellan1@tampabay.rr.com>
>To: <dakota-truck@buffnet.net>
>Sent: Friday, January 18, 2002 8:29 PM
>Subject: DML: Re: RE: 2K Brakes pads - PLEASE HELP
>
>
>> The spring is double riveted onto the outside pad.
>> TonyC
>>
>> -----Original Message-----
>> From: William H. Hiatt III <william@hiatt.net>
>> To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
>> Date: Friday, January 18, 2002 8:02 PM
>> Subject: DML: RE: 2K Brakes pads - PLEASE HELP
>>
>>
>> >Just reuse the spring. Also, raybestos number for this is 820 (I.E.
>> >Superstops would be SSD820)
>> >
>> >william
>> >
>> >-----Original Message-----
>> >From: owner-dakota-truck@BUFFNET.NET
>> >[mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of TonyC
>> >Sent: Friday, January 18, 2002 2:42 PM
>> >To: Dakota-Truck@Buffnet.Net
>> >Subject: DML: 2K Brakes pads - PLEASE HELP
>> >
>> >
>> >I'm about due for a set of pads on the front of the 2K R/T. I've
>> >ordered up sets from Wagner (MX820) and Performance Friction (7464 or
>> >0746.20). Both have been wrong when compared to the factory installed
>> >pads. The inners on both sets were correct, but the outers were both
>> >wrong. The factory outer has a set of locating tits that locate it into
>> >the caliper, along with a 2 sided spring that locates it against the
>> >caliper mount. The Wagner has the tits, but no spring, and the Perf
>> >Friction doesn't have the tits, and the spring is only one sided.
>> >
>> >Has anyone run into this? Has anyone found the correct pad at somewhere
>> >other than the dealer?
>> >
>> >I did call the dealer, and they have two sets available to fit. One std
>> >issue $49, and the other a premium one for $129. The std issue, is a
>> >messy pad. And I feel I can get a premium pad on less than the $129.
>> >
>> >Thanks in advance.
>> >TonyC
>> >
>> >
>> >
>>
>>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:49 EDT