I used this # on my Dak, Raybestos,, PGD820M / COST ME 35.00 AND NO PROBS
DIRECT INSTALL. And lots less dust from pads than the dusty stock ones..
----- Original Message -----
From: TonyC <acellan1@tampabay.rr.com>
To: <dakota-truck@buffnet.net>
Sent: Friday, January 18, 2002 8:29 PM
Subject: DML: Re: RE: 2K Brakes pads - PLEASE HELP
> The spring is double riveted onto the outside pad.
> TonyC
>
> -----Original Message-----
> From: William H. Hiatt III <william@hiatt.net>
> To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
> Date: Friday, January 18, 2002 8:02 PM
> Subject: DML: RE: 2K Brakes pads - PLEASE HELP
>
>
> >Just reuse the spring. Also, raybestos number for this is 820 (I.E.
> >Superstops would be SSD820)
> >
> >william
> >
> >-----Original Message-----
> >From: owner-dakota-truck@BUFFNET.NET
> >[mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of TonyC
> >Sent: Friday, January 18, 2002 2:42 PM
> >To: Dakota-Truck@Buffnet.Net
> >Subject: DML: 2K Brakes pads - PLEASE HELP
> >
> >
> >I'm about due for a set of pads on the front of the 2K R/T. I've
> >ordered up sets from Wagner (MX820) and Performance Friction (7464 or
> >0746.20). Both have been wrong when compared to the factory installed
> >pads. The inners on both sets were correct, but the outers were both
> >wrong. The factory outer has a set of locating tits that locate it into
> >the caliper, along with a 2 sided spring that locates it against the
> >caliper mount. The Wagner has the tits, but no spring, and the Perf
> >Friction doesn't have the tits, and the spring is only one sided.
> >
> >Has anyone run into this? Has anyone found the correct pad at somewhere
> >other than the dealer?
> >
> >I did call the dealer, and they have two sets available to fit. One std
> >issue $49, and the other a premium one for $129. The std issue, is a
> >messy pad. And I feel I can get a premium pad on less than the $129.
> >
> >Thanks in advance.
> >TonyC
> >
> >
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:49 EDT