Just make sure you adjust them properly and recheck them at about 300
miles for final adjustment.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net] On Behalf Of Mike Styer
Sent: Tuesday, January 22, 2002 10:32 PM
To: dakota-truck@buffnet.net
Subject: DML: Re: V6 roller rockers
How and when do you feel that new 7-10 hp? I tore down my V6 to the
bare block just a week ago, and I learned just how easy it was to change
the roller rockers (If you can take off and install a throttle body, you
can change your roller rockers).
Mike Styer
1993 V6 5 speed 2wd
215k on the truck, 82k on the engine www.geocities.com/geek_farm
>Mike Stepp-
> v6 roller rockers are a easy install (less than 2 hours) COMP
>CAMS offers a kit thats is available thru AUTO ZONE, or any mail order
>co. like SUMMIT RACING the kit retails at about $220.00-$240.00 +tax,
>it installs with basic hand tools only thing else needed is a set of
>felpro brand valve cover gaskets, cost about $16.00 thru any felpro
dealer.
>you'll see about 10-15 hp at the crank
>or approx. 7-10hp at the rear wheels. a very cost effective bolt-on.
I
>installed set on my 2001 v6 DAK
>at a buddy's shop onmy day off last fall.
>
>ps the comp cams kit is smog legal comes with EO #
> IN ALL 50 STATES
>
>-Ron
>2001 Dakota sport plus 3.9
>
___________________________________________________
GO.com Mail
Get Your Free, Private E-mail at http://mail.go.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:50 EDT