Whats involved in installing, and what kinda adjustment stuff is
necessary... I dont necessarily trust myself with all the fine adjustments,
like I dotn do pinion/ring gears, and up till now, nothing to do with with
cam/valves/rockers
----- Original Message -----
From: "Sam Parthemer" <srp@home.com>
To: <dakota-truck@BUFFNET.NET>
Sent: Tuesday, January 22, 2002 8:59 PM
Subject: RE: DML: Re:Roller rockers for 97 V-6
> Not true... Running a set of 1.7s on a stock engine will add 5-10 hp,
> and a good bit of torque (20-30 ft. lbs. est.)
>
> I sell Crower 1.6/1.7s... The setup for V6 may or maynot have the guide
> plates (so for applications under 5500 rpm only on V6). Crower does not
> sell the V8 without the guideplates anymore. If you are interested,
> email me and I'll check pricing for you.
>
> Sam
>
>
>
> -----Original Message-----
> From: owner-dakota-truck@BUFFNET.NET
> [mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Andy Levy
> Sent: Tuesday, January 22, 2002 6:51 PM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: Re: DML: Re:Roller rockers for 97 V-6
>
> If it's anything like the V8 RRs, it's not worth the expense and time
> unless you
> already have a LOT of work into the engine.
>
> Baddakota@aol.com wrote:
>
> > I was wondering if anyone has installed a set of roller rockers on
> there 3.9
> > V-6? Any input you could give on them would be helpful, Also, what
> brands
> > are there and how much are they going to cost me?
> > Thanks guys,
> > Mike Stepp
>
> --
> -andy
> andylevy@yahoo.com
> Maintainer, DML FAQ - http://www.dakota-truck.net/faq/
> http://home.twcny.rr.com/andylevy/dakota/
> '99 CC 4x4 318 auto
>
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:50 EDT