So we are looking at the cost of this to help control fuel plus another
product to control timing. Thats getting costly.
What about selling it as a system(set) with the race ICON?
Would something like this make for a better price(value)?
>From: "Bernd D. Ratsch" <bernd@texas.net>
>Reply-To: dakota-truck@BUFFNET.NET
>To: dakota-truck@BUFFNET.NET
>Subject: RE: DML: RE: RE: RE: RE: Hyper Speed Controller - Working and
>noticeably better already
>Date: Wed, 23 Jan 2002 22:53:03 -0600
>
>No
>
>-----Original Message-----
>From: owner-dakota-truck@BUFFNET.NET
>[mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of sam morgan
>Sent: Wednesday, January 23, 2002 9:53 PM
>To: dakota-truck@BUFFNET.NET
>Subject: Re: DML: RE: RE: RE: RE: Hyper Speed Controller - Working and
>noticeably better already
>
>
>Will this box also control the timing?
>
>
> >From: "Bernd D. Ratsch" <bernd@texas.net>
> >Reply-To: dakota-truck@BUFFNET.NET
> >To: dakota-truck@BUFFNET.NET
> >Subject: DML: RE: RE: RE: RE: Hyper Speed Controller - Working and
> >noticeably better already
> >Date: Wed, 23 Jan 2002 19:51:07 -0600
> >
> >
> >Initial pricing was set at $399 (Retail) but with the new design
> >(Programmable), it'll be more.
> >
> >- Bernd
> >
> >-----Original Message-----
> >From: owner-dakota-truck@BUFFNET.NET
> >[mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Tim Althoff
> >Sent: Wednesday, January 23, 2002 10:33 PM
> >To: dakota-truck@BUFFNET.NET
> >Subject: DML: RE: RE: RE: Hyper Speed Controller - Working and
> >noticeably better already
> >
> >
> >what no price... ;)
> >come on just say "very roughly $$$"
> >
> >
> >Tim Althoff
> >99 RC Dak w/ V6 5-speed
> >http://go.to/yllwdkta
> >
> >-----Original Message-----
> >From: owner-dakota-truck@BUFFNET.NET
> >[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Bernd D. Ratsch
> >Sent: Wednesday, January 23, 2002 5:15 PM
> >To: dakota-truck@BUFFNET.NET
> >Subject: DML: RE: RE: Hyper Speed Controller - Working and noticeably
> >better already
> >
> >
> >Actually, it's for just about any vehicle with an O2 sensor (or two).
> >
> >It monitors the O2 signal (we'll use A/F for ease of understanding) and
>
> >corrects it to 14.7:1 under normal cruise and 12.0:1 under WOT (WOT is
> >adjustable +/-1.0).
> >
> >Again, the final product will be ready in 90 days (this is the one with
>
> >the USB port).
> >
> >- Bernd
> >
> >-----Original Message-----
> >From: owner-dakota-truck@BUFFNET.NET
> >[mailto:owner-dakota-truck@BUFFNET.NET] On Behalf Of Tim Althoff
> >Sent: Wednesday, January 23, 2002 10:01 PM
> >To: dakota-truck@BUFFNET.NET
> >Subject: DML: RE: Hyper Speed Controller - Working and noticeably
> >better already
> >
> >
> >ok bernd...I need to take out a little stress (I am supposed to have my
>
> >Computer science program done by Friday at 5pm and have almost
> >nothing...I NEED TO BUY SOME NEW TOYS!!!
> >
> >is this for highly modded or could I get some results from my lightly
> >modded 3.9. (cold air, TB, ignition, exhaust, 180*, modified intake,
> >locker...soon to be 3.90 gears, elec fan, pulley. How do you adjust
> >it? I know laptop but how adjustable is it?
> >
> >most importantly what cost going to look like? thanks
> >
> >Tim Althoff
> >99 RC Dak w/ V6 5-speed
> >http://go.to/yllwdkta
> >
> >-----Original Message-----
> >From: owner-dakota-truck@BUFFNET.NET
> >[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Bernd D. Ratsch
> >Sent: Wednesday, January 23, 2002 4:26 PM
> >To: Dakotart@yahoogroups.com
> >Subject: DML: HyperSpeed Controller - Working and noticeably better
> >already
> >
> >
> >
> >Yup...the HyperSpeed Controller (Proto-Type Rev-II) is installed and
> >functioning as claimed. Much better throttle response, no overly rich
> >(or lean) smell from the tailpipe (home-brew A/F meter...aka: nose),
> >and the kicker is the lean spot caused by the supercharger at 1-2#
> >boost under 1/2-3/4 throttle...it's not there anymore.
> >
> >It took about 50 miles for the PCM to relearn the new (corrected)
> >settings from the HyperSpeed controller (reset the PCM after the
> >initial
> >installation) and adjusted the high-end enrichment a little bit (will
> >need to put back to normal in about 50 more miles or so).
> >
> >The final box will be released in 90 days with a USB port, completely
> >sealed box (for under the hood installation), and software for your
> >laptop. This will allow the end user to fine-tune the fuel curve
> >(across the RPM band in small increment as well)...this means
> >programmable and automatic. Yes..you can adjust on the fly (while
> >driving).
> >
> >I put some pictures of the Proto-Type installation on the SpeedTweaks
> >website (Engine Controls/HyperSpeed) but keep in mind that the final
> >controller will be Plug and Play with your factory O2 sensor(s).
> >Yes...it replaces your stock (forward) O2 sensor(s). With all this
> >said, it's also 100% SMOG LEGAL (CARB EO#).
> >
> >I'll be heading to the Dyno shop this Friday to get some HP and TQ
> >readings, but the butt-dyno already noticed the change...nothing else
> >was installed in the mean time.
> >
> >- Bernd
> >
> >
> >
>
>
>
>
>_________________________________________________________________
>Chat with friends online, try MSN Messenger: http://messenger.msn.com
>
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:50 EDT