I lowered my '95 with 2" spindles, and I did not need to shorten the end
links. I am running 18X8.5 Moda R7 wheels with 255/55 Pirelli Scorpian Zero
tires. I used 3" blocks in the back and have had zero problems in 6 years.
----- Original Message -----
From: "greg conner" <dodgeboy93@hotmail.com>
To: <dakota-truck@BUFFNET.NET>
Sent: Friday, February 01, 2002 4:24 AM
Subject: DML: Lowering questions
> I'm about to install a lowering kist on my 96 dakota. 2in spindels up
front
> and 2in shackles with a 1in block out back, eventually I will be replacing
> the block when I get my spare leaf springs dearched. My question is that
I
> have a set of suspention tecnique front and rear sway bars, I suppose I
need
> shorted end links when the truck is lowered. How much shorter should they
> be and where can I acquire them. I dont need the bushings for the end
> links..just shorter end links. Also, what size tire are you gen 2 guys
> running on a 15x6 in rim infron with a 2in drop?
>
> thanks
>
> _________________________________________________________________
> MSN Photos is the easiest way to share and print your photos:
> http://photos.msn.com/support/worldwide.aspx
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:03:54 EDT