The TransGo "Professional" Shift Reprogramming kit we sell allows for
manual selection and automatic. If you put it in "L" (or 1st), it stays
there...same thing for 2nd. In "D", it shifts through all the gears
with a very positive 1-2 and 2-3 shift. It's not a "tire chirp" shift
as the B&M kits as they destroy transmissions due to the line pressure
being too high (while they sound "cool" by barking the tires...it's
destroying your clutches inside the transmission). The TransGo kit is
really one of the best out there.
- Bernd
-----Original Message-----
From: owner-dakota-truck@dakota-truck.net
[mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Punch
Sent: Saturday, March 16, 2002 10:59 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: trans-go?
alright back to the transgo shift kits for automatics, with the street
version will my neck snap back with every shift?
also, on speedtweaks site, it says you can go back to "automatic "
shifting in "D", do you use a different selection for the kit to work???
basically can I have performance shifts in one selection and factory
shifts in "D"??
they also say you can shift into low at anytime? why? how?
thanks
-- 98 Dakota,CC,V6,Homebrew,Dynomax-Cat-Back,3923's,BFG-KO's,Jet-Stage-II.For Sale: Jet stage 2 chip, stock air box,
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:09 EDT