Only works on 1997 Didn't work on my 98
Jerry Lee
1998 Dakota Regular Cab Deep Amethyst
3.9L 5 spd. Tonneau Cover (soft)
----- Original Message -----
From: "William H. Hiatt III" <william@hiatt.net>
To: <dakota-truck@dakota-truck.net>
Sent: Monday, March 25, 2002 10:53 AM
Subject: DML: RE: RE: pull codes without a code scanner??
>
> Don't know what year you have, but on I believe it's the 98+'s you can
> pull the codes from the PCM by doing the following:
>
> 1) Put the Key in the ignition
> 2) Turn the key to the "Run" position (The one right below start)
> 3) Move back to the "On" Position
> 4) Turn the key to the "Run position
> 5) Move back to the "On" position
> 6) Turn the key to the "Run position
> 7) Move back to the "On" position
>
> The codes will appear in the odometer, flashing the codes, one by one,
> and then it will flash "P DONE" when you've reached the end of the
> codes.
>
> There are ways to do it on older trucks (I may be wrong), but somebody
> else will have to pipe in and give you a hand on that one!
>
> Thanks
> william
>
> -----Original Message-----
> From: owner-dakota-truck@dakota-truck.net
> [mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of taylor9565
> Sent: Monday, March 25, 2002 4:25 AM
> To: dakota-truck@dakota-truck.net
> Subject: DML:RE: pull codes without a code scanner??
>
>
>
> AUTO ZONE can pull the codes for free with a scanner
> and look up the code, no charge!!!!
>
> Ron-
> 2001 Dakota Sport R/C bright silver met
> http://www.twistedbits.net/WWWProfile/dakota/K12X33hlXkiTk
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:13 EDT