Correction// The 9.25 holdes 2 QTS of gear oil and 8 ozs of posi additive.
I just did mine a while back and I documented the amount in my manual. This
amount takes it right to the lwr lip of the fill plug hole.
----- Original Message -----
From: <B1LLYW@aol.com>
To: <dakota-truck@dakota-truck.net>
Sent: Tuesday, April 30, 2002 5:56 AM
Subject: Re: DML: Rear Axle Fluid Change
>
> In a message dated 4/30/2002 8:47:02 AM Eastern Daylight Time,
> rodgers_ryan@hotmail.com writes:
>
> <<I'm due to change the fluid on my 3.92 LSD, but I have one question. I
> understand the how to, but in the Manual I see nothing about quantities.
> How much synthetic 75W90 and Friction additive will I need to buy? I
don't
> want to get started and not have bought enough.
> Thanks all>>
>
> I use Red Line 75w90 gear oil, the sku is 57904. It has the friction
> modifier built into it so you don't have to add any sort of additive. And
> it's a quality product. You need to buy 3 quarts. The 8.25 takes a
> little more than 4 quarts and the 9.25 takes about 4.5 quarts. I don't
know
> which differential you have. If it's 4wd, you'll need to buy some for the
> front differential also - I'm afraid I don't know the capacity on that.
>
> Bill White - http://www.moparforme.com
> '02 QC 4x4, SLT+, 4.7, 5 spd, 3.92's w/LSD, Airaid, MBRP Super Single
> Exhaust, Hurst T-Handle, BFG A/T's, IAS Shocks, 180 t-stat
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:26 EDT