Re: Re: Re: Hughes Engines' response on KRC's 4.7L HO Cams...

From: John Burgan (jgburgan@radicus.net)
Date: Sat Jun 08 2002 - 09:58:31 EDT


Of course I want to tear up your engine, to make up for the 'custom' paint
work someone did to my truck in your driveway last year. :-P

Seriously though, I want to see what they do for your truck because I want
them for mine too.

-John

----- Original Message -----
From: "Paul Bullerman" <hemi287@comcast.net>
To: <dakota-truck@dakota-truck.net>
Sent: Saturday, June 08, 2002 7:03 AM
Subject: DML: Re: Re: Hughes Engines' response on KRC's 4.7L HO Cams...

>
> I bet you are ready to tear up MY engine, only no beer for
> you...light-weight!
>
> ----- Original Message -----
> From: "John Burgan" <jgburgan@radicus.net>
> To: <dakota-truck@dakota-truck.net>
> Sent: Friday, June 07, 2002 8:16 PM
> Subject: DML: Re: Hughes Engines' response on KRC's 4.7L HO Cams...
>
>
> >
> > Yeah I got some input on this. Go order the cams from KRC, I'm ready to
> > drink some beer and tear the top end of your engine open. :-D
> > -John
> >
> > ----- Original Message -----
> > From: "Paul Bullerman" <hemi287@comcast.net>
> > To: <dakota-truck@dakota-truck.net>
> > Sent: Friday, June 07, 2002 6:43 PM
> > Subject: DML: Hughes Engines' response on KRC's 4.7L HO Cams...
> >
> >
> > >
> > > > Can you tell me more info on the 4.7L cams in production? I have a
2K
> > 4.7
> > > > auto 4x4, and www.krcperformance.com is advertising H.O. cams with a
> 20
> > > > lb-ft increase in torque, across the band, for $200.00 (for both).
> > These
> > > > are essentially cams from the new 4.7 H.O. in the 03 Jeep G.C.
> > > > I am ready to buy them, can you convince me why I should wait for
> yours?
> > > > TIA
> > > > Paul
> > >
> > >
> > > Paul,
> > > If they are only $200 a pair I will buy them just to regrind them
> > > for our cams. I would think the price would be closer to $200 or
> > > more each. Cams and kits for overhead cam engines are very
> > > complex vs. an overhead valve engine. We are still working out
> > > the bugs. The factory H.O. engine is rated at 35 flywheekl hp
> > > more than the stnd engine. It has more compression, lighter
> > > pistons, different cam, valve springs, intake system and intake
> > > manifold. I would question 20 hp from the cams only. As a side
> > > note, there is NOT a lot of interest in mods for this engine.
> > > Dave
> > >
> > > Hughes Engines inc.
> > > 23334 Wiegand Lane
> > > Washington, IL 61571
> > >
> > >
> > > Any input on this????
> > > Paul
> > >
> > >
> >
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:04:43 EDT