But on some installs the rear servos can't be installed because of some
clearance issue with a strut, and the instructions say you will need to have
a shop install these parts. From what I understand the parts aren't
absolutely required but without them your shifts won't be as hard as they
could be and you will have binding on a manual 1-2 shift (which I have, and
it sucks)
--Mike
www.mikesdakota.com
----- Original Message -----
From: <bernd@texas.net>
To: <dakota-truck@dakota-truck.net>
Sent: Tuesday, July 02, 2002 6:26 AM
Subject: Re: DML: Re: RE: transgo shift kit questions
>
>
> Some items are not required in the basic valve body/shift kit
installation.
> You will have "spare parts" laying around.
>
> - Bernd
>
>
> >
> > Speaking of the Transgo, I wasn't able to install the rear servo parts
in
> > mine. I was wondering Bernd if you know what's involved with getting
these
> > in there and about how much it would run.
> >
> > --Mike
> > www.mikesdakota.com
> >
> > ----- Original Message -----
> > From: "Bernd D. Ratsch" <bernd@texas.net>
> > To: <dakota-truck@dakota-truck.net>
> > Sent: Tuesday, July 02, 2002 9:05 AM
> > Subject: DML: RE: transgo shift kit questions
> >
> >
> > >
> > >
> > > Chad,
> > >
> > > The "Race or Show-Off" setting is a bit too aggressive for the street
> > > use (unless you like "barking" the tires on the 1-2 shift). We set
them
> > > at the low end of the more aggressive range to keep it at a happy
medium
> > > between the two. Make sure you install the ORANGE spring and grind
the
> > > appropriate valve according to the instructions. Some don't grind
these
> > > which causes oscillations and possible failures in the springs
(breaking
> > > them).
> > >
> > > - Bernd
> > >
> > > -----Original Message-----
> > > From: owner-dakota-truck@dakota-truck.net
> > > [mailto:owner-dakota-truck@dakota-truck.net] On Behalf Of Chad Evans
> > > Sent: Monday, July 01, 2002 9:45 PM
> > > To: dakota-truck@dakota-truck.net
> > > Subject: DML: transgo shift kit questions
> > >
> > >
> > >
> > > for those who have a the transgo kit installed. what level of firmness
> > > did
> > > you go with ? i am in the process of turning my dak into a show truck
so
> > > it
> > > won't see any winter weather(i hope not).is the full strip to much for
> > > the
> > > street ? thanks , chad
> > >
> > >
> > >
> > > _________________________________________________________________
> > > Join the world's largest e-mail service with MSN Hotmail.
> > > http://www.hotmail.com
> > >
> > >
> > >
> > >
> > >
> >
>
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:00 EDT