RTV silicone is used to seal pan. A drain plug would be simple if you can
find someone to weld, or braze the nut on the inside of pan, so it wont
leak.
----- Original Message -----
From: Mallett, Donald B <Donald.Mallett@BNSF.com>
To: 'DML' <dakota-truck@dakota-truck.net>
Sent: Thursday, July 04, 2002 3:20 PM
Subject: DML: Question on the 45RFE tranny
>
> The tranny pan on the tranny that's comes mated up with the 4.7L, Is there
a
> gasket or just a sealant to seal it after doing a fluid and filter change?
> Also has any one put in a after market drain valve in the 45RFE? any hints
> or tips on doing any of the above? Its the 1st time for tranny work for
me.
>
>
> *---------------------------Y2KOTA---------------------------*
> Don Mallett
> Y2K QC 4.7L Auto SLT+
> http://Geocities.com/maldbnsf/
> http://www.dakota-truck.net/profiles/dakota/QwkvWz@DAJFf6/profile.htm
> *-------------Save up to 80% on Dental Services!-------------*
> Includes FREE Prescription, Vision & Chiropractic Plans!
> http://www.iboplus.com/dmallett
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:00 EDT