I see Koller Dodge has the fan on sale for about $129
where the list price is $190.
http://www.worldparts.com/kollerdodge/
Here's the info from the Mopar Performance Parts
Catalog:
Viper V10 Aluminum Crate Motor-Fan And Control
Module
P5007266 Fan and control module
--- Tony Cellana <acellan1@tampabay.rr.com> wrote:
>
> Brad,
>
> I installed a used Dodge Viper Fan in my 99 R/T. I
> did this after having
> trouble controlling temps in hot steamy FL during
> afternoon stop and go
> traffic with the A/C on.
>
> I works damned well. It will pull the temps down to
> the thermostat low of
> 180 if I turn it on manually. Went out to Tucson AZ
> last month in 105-110
> temps without a problem. I have it wired to a
> manual switch along with a
> temp sensor. I plan to include a trip from the a/c
> to turn it on as well.
> If you wire it to trigger from the A/C, don't forget
> a relay or diode to
> isolate it, so you don't lock in the a/c clutch when
> the fan goes on.
>
> I have a wiring diagram for anyone interested.
> E-mail me direct at acellan1
> @ tampabay.rr.com (remove spaces) if you want me to
> send it to you.
>
> TonyC
>
> -----Original Message-----
> From: brad k <brad70_98@yahoo.com>
> To: dakota-truck@dakota-truck.net
> <dakota-truck@dakota-truck.net>
> Date: Wednesday, July 17, 2002 11:21 PM
> Subject: Re: DML: Questions for everyone...
>
>
> >
> >
> >I haven't actually replaced my clutch fan with an
> >electric, but I've been thinking about it. Here's
> >a website explaining the installation of an
> electric
> >fan on a 5.0 rustang. It goes over the different
> >install kits and building your own. (I couldn't
> find
> >any good Dakota pages)
> >
>
>http://www.geocities.com/smithmonte/Auto/MarkVIII_Fan.htm
> >
> >I don't think the fan they use would work on a
> Dodge.
> > Some people have used the Flex-A-lite BM150 and
> the
> > Perma Cool 16" fan with some success. From most of
> >the things I have read they seem to work OK but may
> >have problems in hot weather on a V8. I've just
> >recenly saw some posts on another forum about the
> >possibility of using the Viper crate motor electric
> >fan from Mopar on our Dodges. I'd like to see if
> that
> >would work.
> >
> >Brad K.
> >
> >
> >
> >
> >--- Thomas Mize 3rd <dakotasport94@hotmail.com>
> wrote:
> >>
> >> Now i have a couple of questions i want to ask
> you
> >> all.
> >> ...I have a Mopar Roll-bar that i want to
> put
> >> on my truck,but i dont
> >> want to loose the use of my Tonneau cover(
> >> vinyal,sport master, frame with
> >> snaps) does anyone know if and how the cover can
> be
> >> altered to be mounted
> >> around the bar??
> >> ...I want to remove my Clutch fan and
> replace
> >> it with an electric
> >> fan,that i have seen this weekend. how is the fan
> >> wired?? i just want to get
> >> an idea before i dig in to it!!!
> >> Thank you!!!Tom
> >>
> >>
> >>
> >> ====================================
> >> contact info...
> >> ICQ# 121477359
> >> AOL Mess:dktsprt94
> >> Yahoo Mess:daksprt94
> >> ====================================
> >> 1994 Dodge Dakota Sport(1 of 2,986)
> >> 1995 Dodge Dakota Sport(RIP)
> >> 1995 Dodge Stratus ES(1 of 593)
> >> 1989 Dodge Daytona (1 of 1,196)
> >> 1988 Dodge Daytona Pacifica(1 of 457)
> >> North East,Maryland USA
> >> --------------------------------------
> >> http://www.fortunecity.com/silverstone/lancia/193
> >>
> >>
> >>
>
>_________________________________________________________________
> >> Send and receive Hotmail on your mobile device:
> >> http://mobile.msn.com
> >>
> >
> >
> >__________________________________________________
> >Do You Yahoo!?
> >Yahoo! Autos - Get free new car price quotes
> >http://autos.yahoo.com
> >
>
__________________________________________________
Do You Yahoo!?
Yahoo! Autos - Get free new car price quotes
http://autos.yahoo.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:05 EDT