Re: RE: Just Zaino'ed the Dak

From: Michael Clark (dml@mikesdakota.com)
Date: Tue Jul 23 2002 - 08:40:01 EDT


Turned out pretty good. I had a heck of a time removing it just like you
said. My main problem was that the humidity was so dang high! I think I
could have parked in the bottom of a swimming pool and had a dryer
environment to work in. If I didn't have to come to work today I would have
let it set overnight and most of the next day before removing it. This was
the Z-5 too, which I think is a bit thicker than the normal Z-2 and is a tad
more difficult to remove. I've used zaino before and you're right, once you
get a few coats on it comes off VERY easily.

--Mike
www.mikesdakota.com

----- Original Message -----
From: "Sevrence, Sean (S.J.)" <ssevrenc@visteon.com>
To: <dakota-truck@dakota-truck.net>
Sent: Tuesday, July 23, 2002 6:36 AM
Subject: DML: RE: Just Zaino'ed the Dak

>
> Hey Mike!
>
> How'd it turn out? When you remove the haze the first time, it takes a
fair
> amount of effort. Don't worry, as you only experience that once :) You'll
be
> amazed at how little effort is required with each additional coat!
>
> Enjoy your efforts! I know everyone else will be.
> Sean
> '92 RC Sport 3.9L 5spd - 256,000mi!
> '01 CC SLT+ 4.7L 5spd 3.92 LSD Mobil-1 - 49,200mi!
> http://www.twistedbits.net/WWWProfile/dakota/DnuuSncssJujU
>
>
> -----Original Message-----
> From: Michael Clark [mailto:dml@mikesdakota.com]
> Sent: Monday, July 22, 2002 8:59 PM
> To: dakota-truck@dakota-truck.net
> Subject: DML: Just Zaino'ed the Dak
>
>
>
>
> Just spent 4 hours after work today Zaino'ing the Dak.
> I did the whole 9 yards; Dawn soap, clay-bar, Dawn
> soap again, Z-1, and a coat of Z-5. I'm going to put
> 3 coats of Z-5 and then switch over to Z-2. Should
> look pretty slick in a few hours when I buff off the
> dry Z-5. I'll see about snapping some pics if it
> comes out all wet looking, which I'm sure it will.....
>
> www.zainobros.com
>
> --Mike
> www.mikesdakota.com
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:06 EDT