you can get a cam from MP for the pre-magnum V6 only! I've check as
well...I'm watching bernd with his new cam that is soon available...as soon
as it's available it's mine along with heads...
Tim Althoff
99 SY 3.9 5-Speed 'Customized' RC Dakota
http://www.yllwdkta.com
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Wes Weems
Sent: Thursday, September 19, 2002 11:45 PM
To: dakota-truck@dakota-truck.net
Subject: Re: DML: A few cam questions... need advice!
Uhh well I think they do... I can get you part #'s if you dont beleive me...
a overall performance cam, and then a low speed power cam...
3.9L V6 Hydraulic Camshafts
Part Number Advertised Duration O-Lap Center Line Lift Recom. Spring Tappets
Applications & Comments
*P4452806 240/240 20 110 .405/.405 P4286813 Y Perf. RV - low speed power
*P4452808 248/256 32 110 .410/.425 P4286813 Y Mild comp. & perf. RV
----- Original Message -----
From: "Gary Hedlin" <ghedlin@theramp.net>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Thursday, September 19, 2002 8:16 PM
Subject: Re: DML: A few cam questions... need advice!
>
> I know for a fact Mopar Performance does not make a V6 Cam. I asked
Koller
> Dodge today when I ordered my gaskets, timing chain, & springs.
>
> Not to get off topic, but wouldnt you want to replace the valves while
your
> in there?
>
>
> Gary Hedlin
> "The Crazy Quadraplegic"
> ghedlin@theramp.net (business)
> ragingquad@yahoo.com (personal)
> **Also Webmaster For**
> http://garyhedlin.com
> http://socaldakota.com
> http://scsilverdak.com
> http://assistivetechnologies.com
> ...And Many More!
>
> ""Gabriel A. Couriel"" <BigGabe@FIUFIJI.com> wrote in message
> news:LGEHJPEPBFBBEPPBEOFMCEFMCAAA.BigGabe@FIUFIJI.com...
> >
> > and they make them for V6? i thought that the cams sold by MP were V8
> only.
> >
> > Gabe Couriel
> > http://frontpage.tripod.com/fijigabe0
> >
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Wes Weems
> > Sent: Thursday, September 19, 2002 6:46 PM
> > To: dakota-truck@dakota-truck.net
> > Subject: Re: DML: A few cam questions... need advice!
> >
> >
> >
> > you can get a mopar performance mild perf cam, for lowend power, and its
> > actually cheaper than a regular replacement, but the dealer said
chrysler
> > doesnt have them in stock and it would be weeks before they could get
one.
> >
> > Wes
> > ----- Original Message -----
> > From: "Gabriel A. Couriel" <BigGabe@FIUFIJI.com>
> > To: <dakota-truck@dakota-truck.net>
> > Sent: Thursday, September 19, 2002 3:13 PM
> > Subject: RE: DML: A few cam questions... need advice!
> >
> >
> > >
> > > i think he also asked about performance cams for the V6, i'm
interested
> on
> > > this subject, so are there any cams to help out the V6 on mildly
> modified
> > > engines?
> > >
> > > Gabe Couriel
> > > http://frontpage.tripod.com/fijigabe0
> > >
> > > -----Original Message-----
> > > From: owner-dakota-truck@bent.twistedbits.net
> > > [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of
> > > jon@dakota-truck.net
> > > Sent: Thursday, September 19, 2002 5:32 PM
> > > To: dakota-truck-moderator@bent.twistedbits.net
> > > Subject: Re: DML: A few cam questions... need advice!
> > >
> > >
> > >
> > > "Wes Weems" <wweems@fix.net> wrote:
> > >
> > > : will I need new bearings lifters etc? My FSM shows how to pull the
> > lifters
> > > : and clean em, and they work for now... I am just so damn broke I
cant
> > > afford
> > > : anythign. =(
> > >
> > > No, you shouldn't need to change the bearings and lifters unless
they
> > > are damaged. (Normally you would replace the lifters on a flat tappet
> > > cam, but since the Magnums use a roller cam, they can be re-used). As
> > > far as the bearings go, if they are bad, the engine would probably
need
> > > to be pulled to replace them anyway, so hope that they are good. :-)
> > > (They should be OK though.)
> > >
> > >
> > > --
> > >
> > > -Jon-
> > >
> > > .---- Jon Steiger ------ jon@dakota-truck.net or
> > jon@jonsteiger.com -----.
> > > | I'm the: AOPA, DoD, EAA, NMA, NRA, SPA, USUA. Rec & UL Pilot -
SEL
> > |
> > > | '70 Barracuda, '92 Ram 4x4, '96 Dakota, '96 Intruder 1400, '96
> FireFly
> > |
> > > `-----------------------------------------
> > http://www.jonsteiger.com ----'
> > >
> >
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:22 EDT