Hey, Roger,
<snip> I just had to have the lower control arm replaced for the same
reason; they
were afraid of damaging the threads if they drilled the bolt out.....<snip>
How much was the arm? How much for labor? I had the driver's side bolt back
out of the lower control arm & I loctited the threads when I retorqued it.
'Course THEN the damn thing broke & I hadda drill out the old one & REALLY
mahtzoed the threads. I drilled them COMPLETELY out & installed a 1/2-13UNC
bolt with a nut on it.
I know I'm gonna have problems - if and when - I change out the ProComps &
go with Tockico's.
TIA,
Bob Smith (DAKSY2K on AIM)
Averill Park, NY
2K DAK SY Sport + V6 4X4 5 Speed
WebPage URL: http://home.nycap.rr.com/daksy/
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:05:25 EDT