It's actually normal for the IAT sensor to have a light coating of oil
on it. Remember, the PCV system sucks oil vapors back into the intake
system...the IAT sensor (when installed in the manifold) gets coated
with oil.
- Bernd
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of Tony
Cellana
Sent: Monday, November 18, 2002 6:30 PM
To: dakota-truck@dakota-truck.net
Subject: DML: Re: IAT?
The goo is abnormal. Try soaking it in alcohol. To check the bellypan
gasket, pull the airhat, open the TB butterflies, and peer down with a
flash light. If there is more than a light coating of oil, you probably
have a bad belly pan gasket. TonyC
-----Original Message-----
From: Kyle Vanditmars <kylevan@telus.net>
To: dakota-truck-moderator@bent.twistedbits.net
<dakota-truck-moderator@bent.twistedbits.net>
Date: Monday, November 18, 2002 7:28 PM
Subject: DML: IAT?
>
>A quick question if someone wouldn't mind answering...
>
>I pulled the IAT to relocate it, and the thing was covered in what
>looked and smelled like oil - it was a black, greasy substance, anyway.
>Is this normal? I'm thinking not. Would it be the belly pan gasket
>leaking on me? Any help is much appreciated.
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:26 EST