Sam,
You can purchase zert fittings at a hardware or auto parts store. They do
come in different sizes, so you'll either have to take in one of your plugs,
look up the thread size, or call a dealer.
Rich - Ashburn, VA
-----Original Message-----
From: Sam Hotmail [mailto:samjperez@hotmail.com]
Sent: Thursday, December 12, 2002 12:12 PM
To: dakota-truck@dakota-truck.net
Subject: DML: Ball Joints
While changing my oil this weekend I noticed that both ball joints, upper
and lower on both sides could use a little grease. However I noticed also
that neither has a nipple to attach the grease gun to. So I went to the FSM
and it says that if equipped then you can grease them. But how do you grease
them if not equipped. Any help would be greatly appreciated. My thoughts go
to Sir Bill as he recuperates.
Sam
'00 Back Dakota Sport 4.7L
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:48:14 EST