Were any of your speakers blown before you put in the aftermarket radio?
Reason being is that if a speaker is blown and it is grounding out, it
causes almost all aftermarket radios to shut off. I mean it will still
power up, but you will get no sound...or you have a factory amplifier that
you need to bypass...one of those two things I would think...
Eric Jerman
>From: "Bill Knight" <wknight40@comcast.net>
>Reply-To: dakota-truck@dakota-truck.net
>To: dakota-truck-moderator@bent.twistedbits.net
>Subject: DML: Re: Stereo Wiring Diagram
>Date: Sun, 9 Mar 2003 17:17:44 -0500
>
>There should be two plugs on the back. One for the power and one for the
>speakers. When I replaced mine I plugged it in and everything worked.
>Once
>I replaced the speakers, previous owner removed them and I did not notice
>until the next day. If the head unit was bought used chances are the
>internal amp is probably blown. As far as an external amp you should not
>need one. Bill
>
>"Jayson Woodruff" <woodrufj@yahoo.com> wrote in message
>news:3E6BB1D0.9020004@yahoo.com...
> >
> > I poped out the nicer factory unit out of my dak and poped in a head
> > unit that was wired to replace the cheaper factory unit. It powers up,
> > but sound doesn't get to the speakers. Is there a amp I need to power
> > or something?
> >
> > Does someone have a wiring diagram for the stereo's of the 2000 daks.
> >
> > Thanks.
> >
> > Jay W
> > 505/287 Dakota
> >
_________________________________________________________________
Add photos to your messages with MSN 8. Get 2 months FREE*.
http://join.msn.com/?page=features/featuredemail
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:45:59 EST