I can't help you on the foglight problem......But as far as the license
plate light........
Summit sells a plate frame with the light built in that works real well, I
had one on the Lund pan on my '96 Dakota Sport........worked
great!!!!.......
Ron-
Co-owner: Muscletrucks.net
website: www.muscletrucks.net
e-mail: scsilverdak@hotmail.com
----- Original Message -----
From: "Gregg" <GTOmo@onlineracin.com>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Saturday, May 17, 2003 11:38 PM
Subject: DML: Fog Light question and roll pan light question
>
> hello all,
>
> I have a question about fog lights and them shutting off when the brights
> come on.
>
> I installed fog lights and an air dam from a 95 model (the light group
> package) on my 92 when I had an accident and had the front end fixed. Now
I
> live in VA and they have a safety inspection. Well, my fog lights don't
> shut off with the high beams since they are wired to the battery and there
> is a separate switch that I use to control them. I was wondering if I
need
> to swap out the headlight switch or the bright/dim turnsignal unit or if I
> just wire them into the low beams and the headlight switch unit will know
to
> shut them off?
>
> To my knowledge fog lights were not a factory option until 95, so I am
> thinking that I will need a headlight switch (the thing you pull out to
turn
> the lights on) and a turn signal/low beam/high beam unit on the steering
> column from a 95. Anybody have any opinions?
>
> Also, anybody have an easy solution for installing a license plate light
> into a Lund roll pan? The safety inspector said I need one of those also.
> I think PepBoys or AutoZone has some units that are easily wired in, cause
> the wires are there, since the original bumper had lights.
>
> Thanks for your help.
>
> Gregg
> 92 V6 CC
>
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:20 EST