Just put a switch in line for them and dont turn them on during inspection.
>From the factory there is a separate switch to turn them on or off.
----- Original Message -----
From: "scsilverdak" <scsilverdak@hotmail.com>
To: <dakota-truck@dakota-truck.net>
Sent: Sunday, May 18, 2003 6:15 AM
Subject: DML: Re: Fog Light question and roll pan light question
>
> I can't help you on the foglight problem......But as far as the license
> plate light........
>
> Summit sells a plate frame with the light built in that works real well, I
> had one on the Lund pan on my '96 Dakota Sport........worked
> great!!!!.......
>
> Ron-
> Co-owner: Muscletrucks.net
> website: www.muscletrucks.net
> e-mail: scsilverdak@hotmail.com
> ----- Original Message -----
> From: "Gregg" <GTOmo@onlineracin.com>
> To: <dakota-truck-moderator@bent.twistedbits.net>
> Sent: Saturday, May 17, 2003 11:38 PM
> Subject: DML: Fog Light question and roll pan light question
>
>
> >
> > hello all,
> >
> > I have a question about fog lights and them shutting off when the
brights
> > come on.
> >
> > I installed fog lights and an air dam from a 95 model (the light group
> > package) on my 92 when I had an accident and had the front end fixed.
Now
> I
> > live in VA and they have a safety inspection. Well, my fog lights don't
> > shut off with the high beams since they are wired to the battery and
there
> > is a separate switch that I use to control them. I was wondering if I
> need
> > to swap out the headlight switch or the bright/dim turnsignal unit or if
I
> > just wire them into the low beams and the headlight switch unit will
know
> to
> > shut them off?
> >
> > To my knowledge fog lights were not a factory option until 95, so I am
> > thinking that I will need a headlight switch (the thing you pull out to
> turn
> > the lights on) and a turn signal/low beam/high beam unit on the steering
> > column from a 95. Anybody have any opinions?
> >
> > Also, anybody have an easy solution for installing a license plate light
> > into a Lund roll pan? The safety inspector said I need one of those
also.
> > I think PepBoys or AutoZone has some units that are easily wired in,
cause
> > the wires are there, since the original bumper had lights.
> >
> > Thanks for your help.
> >
> > Gregg
> > 92 V6 CC
> >
> >
> >
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:20 EST