Kevin......you'll need a OBD-II scanner
which will cost about $150.00 bucks or
a trip to the dealer or tune -up shop.....
But there is another option.........Your local Auto Zone should have a store
use
code scanner and will pull the code for free if you go in to the store and
ask for a code check...........
go in and say.....
"please check my cooodes!!"
Pretty simple takes only a few minutes.....
Ron-
----- Original Message -----
From: "Kevin Sellstrom" <ksellstr@softcom.net>
To: <dakota-truck@dakota-truck.net>
Sent: Friday, May 30, 2003 1:39 PM
Subject: Re: DML: Re: Pulling codes on an 02 , 5.9
>
> At 07:55 AM 5/30/2003 -0400, you wrote:
> >It works on my '02 5.9 R/T, so I'm assuming it should work on his '02.
Does
> >he get any kind of message when he does it?
>
> OK, I'm told that from '97 on they require a scanner. I tried it on my
'99
> Dak, and mom's '99 Durango and got absolutely nothing with the old on/off
3
> times or 5 times method. No messages in the odometer, no flashing
"engine"
> light, NOTHING Holding in the ODO button while turning on the key only
> sends the instrument group through a test sequence before returning to
> normal operation.
>
> What am I missing???
>
> Kevin
>
> >
> > > On my 97 Dak I can pull my codes using the on/off method 3 times, but
a
> > > friend has a 2002 Dak Quad cab
> > > 5.9 auto, and this method does not work. For this year and model is
there
> > > some other way of pulling codes through the odometer, such as maybe
more
> > > than 3 times or ?
> > >
> > > Thanks for any advice
> > > Jay
> > >
>
> Kevin Sellstrom, W6KTB E-Mail:ksellstr@softcom.net
> ***Wilton, California***
>
> '99 Dodge Dakota CC, 4x4, 5.2,
> '69 Dodge D200, 4x2, 318,
>
> Also: '83 Volvo 244Ti, '85 Volvo 244, '68 Volvo 122S, '98 Specialized
> Rockhopper A1FS
>
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:22 EST