If you've never taken them off before, you'll need to take the clips off of
the studs first, but yes, you'll need to adjust them in a little bit to aide
in removing the drum. Crack it with a mallet and it should come free with
minimal effort.
-- - Josh Lowered 2000 Dakota CC 3.9L""Tim Althoff"" <talthoff@yllwdkta.com> wrote in message news:4EBE1B363F81D048BE0A3D264CAB25112862B5@constellation.ibeamsolutions.com... > > I am going to need to remove my brake drums to slide my axles out a bit but have always had problems doing so. Do I need to remove the plug on the back side and rotate the adjuster screw down or up to loosen the grip of the shoes to the drum. Also, any other ideas on how to remove the drum? > > Tim Althoff > www.yllwdkta.com >
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:26 EST