Re: IAT sensor probs

From: Bob Tom (tigers@bserv.com)
Date: Thu Aug 07 2003 - 23:34:57 EDT


At 01:39 AM 8/8/03 +0000, you wrote:
>--SNIP-- it is actually p0351, im assuming that has to do
>with the IAT as well? Jimmy L

The p0351 is the code for peak primary circuit current not achieved
with maximum dwell time. This dtc will also light the check engine
lamp. Check the harness/connector at the ignition coil. Check
the distributor cap (inner and outer) for signs of arcing. Check
the coil primary resistance. It should measure less than 2 ohms
if it's okay.

HTH.
Bob



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:46 EST