Thanks! Bob, that should be all we need.
>
> <snip>All we are needing now is the torque spec for the header bolts<snip>
>
> The 2K FSM says that all studs & bolts on the exhaust manifold are to be
> torqued to 18 lbs/ft. It also says to install the lower ones first
> (loosely), drop the vehicle & then install the uppers. Tighten all of
them -
> starting at the center & working outwards...
>
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:46 EST