You are very welcome Ken
Rascal
-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net] On Behalf Of dametalr
Sent: Thursday, August 28, 2003 2:25 AM
To: Dakota Mailing List
Subject: DML: Viper Fan
Good info and ideas stirred up here! I will be using it on my 99 CC that
sees regular desert towing/hauling duty, and now has the added thermal load
of a turbo to deal with. Apparently there are Viper cats that have no
cooling troubles with their high hp track toys- ok, so no stop n go. My
recent research has turned up the figures of 2500 cfm at low speed and 4000
cfm at high speed. Should be jus fine. I run an underdrive crank pulley
and haven't had any juice problems, though I can imagine a 50amp surge could
dip the volts for a moment. Upgrading the alt to PDC and PDC to Batt cable
is a good idea (6ga up to 2 or 0ga)--you will be happy.
Thanks for all of your responses (Rascal, your experience with the BM fan is
what I had remembered being talked about from some years ago--just couldnt
quite keep up. Thanks for your response)
Ken in Simi Valley, CA
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:54 EST