Re: Re: Re: Re: Exhaust Systems II

From: Chad Evans (hemidak@msn.com)
Date: Wed Sep 17 2003 - 14:08:23 EDT


the only problem I have had is the tips have broken off. actually just the
part that bolts to the frame. Ron taylor has had the same problem.

----- Original Message -----
From: "Chris Lambert" <chris@dakotausa.com>
To: <dakota-truck-moderator@bent.twistedbits.net>
Sent: Wednesday, September 17, 2003 11:25 AM
Subject: DML: Re: Re: Re: Exhaust Systems II

>
> I'll see if i can get a pic. there is one on my site of the kit. Truck is
> a
> little low to crawl under now so I'll see what i can do. I have had mine
> on
> for 2 years now with no problems
>
>
> ""Chad Evans"" <hemidak@msn.com> wrote in message
> news:BAY4-DAV113WgDS7GXP0003d4bc@hotmail.com...
> >
> > Chris how are the welds on the mbrp system ?
> > The muffler specifically ?
> > Would it be possible to get a pic from yours or a customers. the muffler
> > that is.
> >
> >
> > ----- Original Message -----
> > From: "Chris Lambert" <chris@dakotausa.com>
> > To: <dakota-truck-moderator@bent.twistedbits.net>
> > Sent: Wednesday, September 17, 2003 7:55 AM
> > Subject: DML: Re: Exhaust Systems II
> >
> >
> > >
> > > The MBRP Split Dual is what you want. It is 100% bolt on. I did mine
> > > in
> > > less
> > > than an hour. Just take the factory stuff off and bolt on the new.
> > > Works
> > > fine withup to a 31" spare contact me
> > >
> > >
> > >
> > > "Brian Mingle" <bsm11@cornell.edu> wrote in message
> > > news:5.2.1.1.2.20030917083101.00a7cdf8@postoffice9.mail.cornell.edu...
> > > >
> > > > I should clarify what I am looking for. I know there are tons of
> single
> > > > pipe applications for my truck, but I am looking for a dual cat back
> > > system
> > > > like Gibon's Dual Split Rear exhaust. My ultimate goal is to put a
> > > > set
> > > > of
> > > > Gibson headers on it, and run duals out the back, but money is
> > > > tight.
> If
> > > > I
> > > > could find a decent dual outlet cat back system for my truck, that
> > > > doesn't
> > > > need a lot of fabricating, that would be great. One of the guys on
> > > > the
> > > list
> > > > is actually looking up some stuff for me, but it never hurts to have
> > > > more
> > > > than one source. ;-)
> > > >
> > > > Thanks
> > > >
> > > > Brian
> > > >
> > >
> > >
> > >
>
>
>



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:46:58 EST