Neil W. Bellenger wrote:
> -----Original Message-----
> From: owner-dakota-truck@bent.twistedbits.net
> [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Dale Schultz
> Sent: Wednesday, October 29, 2003 8:57 PM
> To: dakota-truck-moderator@bent.twistedbits.net
> Subject: Re: DML: RE: Follow-up to: Vibration in Chassis
>
>
> Definitely have the drive shaft rebalanced, or, if the shop recommends,
> replace it. THEN replace the bearings in the diff.
>
>
>
I took the shaft in and apparently it was oval. They measured between
20 to 65 thou in one revolution. They suggested re-tubing as the yokes
are in fine shape. New tube, labour and balancing + tax, $291 CDN.
I've lined up a dry place in a friends garage and we're going to tackle
the diff next.
Dale
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:05 EST