-----Original Message-----
From: owner-dakota-truck@bent.twistedbits.net
[mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of Dale Schultz
Sent: Thursday, October 30, 2003 8:02 PM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: Re: DML: RE: Follow-up to: Vibration in Chassis
<I took the shaft in and apparently it was oval. They measured between
20 to 65 thou in one revolution. They suggested re-tubing as the yokes
are in fine shape. New tube, labour and balancing + tax, $291 CDN.>
Sounds like you're getting it done right Dale.
Something I neglected to mention earlier, now would be a good time to have
greaseable u-joints installed. This might be a good idea if you ever take
the truck in the mud or water. (I've forgotten if yours is a 4X)
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:05 EST