A drift, and a hammer. reverse rotation nut I believe.
TonyC
-----Original Message-----
From: DAKSY <rsmith13@nycap.rr.com>
To: Dakota Mailing List <dakota-truck@dakota-truck.net>
Date: Friday, April 09, 2004 8:48 AM
Subject: DML: Fan removal
>
>Hey, DML...
>Guess nobody saw my post on the water pump/ fan problem...So I'll post
>again...
>I got the fan/waterpump assembly out of the DAKSY, but I can't get the nut
>between
>the fan & the pump to break loose...I've got the whole thing in a big vise,
>clamped on
>the WP casting...I jammed an old screwdriver into the impeller& have that
>wedged
>against the top of the vise to prevent the shaft from turning...I've a
>big-honkin crescent
>wrench on the 36 mm nut, but I can't get er to break loose...the FSM
assures
>me it's
>got a right hand thread, & there are no notches in the hex to indicate it's
>left hand...
>What do I hafta do? Do I hafta walk to NAPA to get the wrenches/tools cited
>in the FSM?
>Hep me DAKsperts!
>
>Bob Smith (DAKSY2K on AIM)
>(with a dead DAK in my driveway...)
>Averill Park, NY
>2K DAK SY CC Sport + V6 4X4 5 Speed
>
>WebPage URL: http://home.nycap.rr.com/daksy/
>
>
This archive was generated by hypermail 2b29 : Sat May 01 2004 - 12:00:16 EDT