Re: Re: Extreme Velocity air hat fits!

From: Bernd D. Ratsch (fasstdak@hotmail.com)
Date: Thu May 06 2004 - 07:04:53 EDT


With a '98 modified V8 TB on it? ;)

Didn't have to modify anything with the dremel though.

- Bernd

----- Original Message -----
From: "John Neff" <jndneff@texas.net>
To: "Dakota Mailing List" <dakota-truck@dakota-truck.net>
Sent: Wednesday, May 05, 2004 11:23 PM
Subject: DML: Re: Extreme Velocity air hat fits!

>
> Odd, mine doesn't bind at all even with the inlet pointing straight out.
> Maybe it's a '97 V6 thing? :-)
>
> It did at first appear like it might bind when operating the throttle by
> hand, but when I have someone press on the go peddle, the linkage doesn't
> rotate as much and doesn't hit the hat. Don't forget you will need to do a
> little dremel work on the air diverter to clear the hold down hardware.
>
> Then again, as we have all found out too many times, all of our trucks are
> just a little different and every install needs to be handled as it's own!
>
> John
>
> > Got mine today from FedEx. Very nice piece and can definitely see how
it
> > could increase performance (as compared to either the stock airhat or my
> > Paxton).
> >
> > One thing to watch out for...the linkage will bind up on the airhat
(stock
> > TB or modified TB) unless you turn it towards the firewall a little bit.
> > (I'm using an APS Speed-Ring so I don't have that problem.)
>
>



This archive was generated by hypermail 2b29 : Tue Jun 01 2004 - 10:59:11 EDT