Re: Re: DML OT. Center Hub Nut on Ram

From: Tcanzano@aol.com
Date: Thu May 06 2004 - 18:47:02 EDT


Thanks! He did say that he got up to around 300 ft-lbs of torque when the 1/2 drive broke. I'll let him know to use 3/4" or 1" drive stuff.
>
>
>
> Been there; done that.. Id' recommend a bigger drive that just 1/2 inch.. I
> thought we'd used 3/4inch drive, and roughly 6-7 feet of breaker bar.. but
> with around 3-400# that far out.. we managed to get it loose.. and it was
> still not easy. Not sure of the torque specs.. must be close to the same
> thing they set the spark plugs at from the factory.
> Aaron Wyse
>



This archive was generated by hypermail 2b29 : Tue Jun 01 2004 - 10:59:12 EDT