Re: RE: injectors (again)

From: Orange383 (orange383@comcast.net)
Date: Thu Aug 05 2004 - 03:00:08 EDT


Yes, I have a MP comp. for a 95 360. Is there something i should know?

David

----- Original Message -----
From: <B1LLYW@aol.com>
To: <aol@dakota-truck.net>
Sent: Wednesday, August 04, 2004 3:34 AM
Subject: Re: DML: RE: injectors (again)

>
>
>
>
>
> In a message dated 8/4/2004 1:27:14 AM Eastern Standard Time,
> orange383@comcast.net writes:
>
>
> > Bernd, Will or anyone else who might know...would it hurt to use the FMS
> > 24lb injectors? I ask because the motor came with them and I don't have
the
> > stock 19s. Assuming I adjusted correctly for the fuel pressure, the FMS
24s
> > should operate slightly higher than 21lbs in a 95 motor that runs at
39psi
> > fuel pressure, correct? Sorry to be a pain, but this doesn't seem like
a
> > very straight forward upgrade in terms of application requirements.
> >
>
> You will be fine. '95 360 Ram's came stock with 24lb injectors. Are you
> running a 360 pcm?
>
> Bill White - KRC Performance
>
> http://www.bionicdodge.com
>
> '95 Dakota CC 4x2 - 408, 5 speed, 8 3/4, etc.
> '04 Liberty, 4x4, 3.7, 5 speed, LSD
>
>



This archive was generated by hypermail 2b29 : Wed Sep 01 2004 - 00:53:40 EDT