Ray
Tell me how to put in neutral.....
Sorry I am not the one putting it in so I ask the questions that usually don't
need to be asked. You mean the gear shift itself correct
Thanks
Ils
In article <DHELJEKAGJCDGEGBEHHJEEKFEHAA.bpracing@worldnet.att.net>,
bpracing@worldnet.att.net ("RayB") writes:
>
>
> The most common hang-up is the park rod. Put the valve body in neutral and
> slide the rod in place. If it doesn't pop right in, reach back and turn
> the driveshaft while pushing the vb and park rod into position. Usually
> goes right in.
>
> RayB
> http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
>
> > -----Original Message-----
> > From: owner-dakota-truck@bent.twistedbits.net
> > [mailto:owner-dakota-truck@bent.twistedbits.net]On Behalf Of
> > eischens@mchsi.com
> >
> > Help! Have the valve bosy out so that the hubby could get
> > transgo shift kit
> > installed. That part went without a hitch and I am up a creek
> > w/o a paddle.
> > Can not get the thing to go into the 99 dakota. Basically fell out when
> > pulling apart I am absolutely confused. Need some guidance from
> > some one.
>
This archive was generated by hypermail 2b29 : Wed Sep 01 2004 - 00:53:42 EDT